CSM-608CNC 6 axis CNC Compression Spring Machine
CSM-608CNC 6 axis compression spring machine, wire diameter 0.1~0.8mm
LEARN MORE
- Product detail
- Range of application
Specification of CSM-608CNC Compression Spring Machine :
| Model: | CSM-608CNC |
| Wire Diameter: | 0.1-0.8mm |
| Maximum Outside Diameter: | ￠20mm |
| Production Rate: | 0-800pcs/min |
| Feed Length: | unlimited |
| Wire Feed Y Axis: | 0.75kw |
| Cutter A/B Axis | 0.4kw*2 |
| Cam X Axis: | 0.4kw |
| Pitch Z Axis: | 0.4kw |
| 10.Arbor back-and-forth U Axis: | 0.4kw |
| Monitor Display: | Chinese/English |
| Feeding Value: | Y:0.01-99999.99mm |
| Feeding wheel: | 1 set |
| Storage Capacity | 0-999 programs |
| Machine Dimension: | 1000*700*1350mm |
| Machine Weight: | 550kgs |
| Power AC: | 3P-220v 50/60Hz |
Details of CSM-608 Spring Making Machine :
CSM-608 is good combination of speed and precision.With Taiwan Controller and Japanese IndustrialServo Motor,
it is consisted by one wire feeding axis,one OD axis, two cutter axis, one pitch axis and onemandrel back and forth axis.
It increased springoroduction ouducing manualoperationdifficulty and saving product set-up time.
1.Independent cutter and mandrel design, able todetect the best coiling position through CNC.
2.Field-bus controller, with quick reaction speed andwell synchronism.
3.Faster conversion ofleft and right hand spring toolsetting.
4.Special equipment for making compressionsprings,torsional springs, tension springs and wireforms.
Product Range:
This compression spring machine make various compression springs, wire coil, oil seal springs, battery springs, taper springs, double-taper springs, safe springs, clip spring as well as simple wire forms.